Flow: time tracking
In Flow, you can record how much time went into a task, a deal, or any other object: run a timer while you work or enter the time manually — "2h 30m". Flow adds up the entries in the card, compares them with the estimate, rolls up time from a project's tasks, and builds a report for a period with CSV export. Time tracking is on in every workspace and needs no setup.
The "Time" block in the card
The right column of the card has a "Time" block. It contains:
the "Timer" button — starts and stops the timer;
the total time logged on the object;
"of N h estimated" — if the object has an estimate filled in (see below), with a progress bar;
"Billable: …" — how much of that time is marked billable;
"With linked objects: …" — time including child objects, such as a project's tasks;
time per person — if several people logged time;
"Log time manually" — the manual entry form;
the list of entries: duration, who, when, comment, and the "billable" mark.
If you are not allowed to log time on the object and it has no entries, the block is not shown.
Timer
Click "Timer" in the "Time" block — the timer starts, and the button shows the running time ("0:12:45"). Click the button again to stop it: Flow logs the elapsed time and reports "Logged: 12 min".
One timer per person per workspace. If you start a timer on another object, the running one stops and logs its time: "Previous timer stopped: …".
Less than a minute is not logged. An accidental click does not create an entry: "Less than a minute — time not logged".
Never more than 24 hours. If you forget to stop the timer, exactly 24 hours are logged. Correct the entry manually.
The timer runs on the server, not in the tab: you can close the tab, reload the page, or open Flow on another device — no time is lost. Two tabs won't start two timers or log the same time twice.
Timer indicator
While a timer is running, the left column of Flow shows, below the workspace switcher, the time, the object's title (a link to it), and a "Stop timer" button. You can stop the timer from here without opening the card. The indicator shows the timer of the current workspace.
If the object was archived or you lost permission to edit it while the timer was running, stopping it still logs your time.
Manual entry
Expand "Log time manually":
"Duration" — how long (the field hint is "2h 30m").
"Date" — the day of work, today by default. You cannot pick future dates.
"Comment" — what you did, up to 2,000 characters.
"Billable" — check it if the time is billed to the customer.
Click "Log".
You can enter the duration in several ways:
What to enter | What it means |
|---|---|
| 2 hours 30 minutes |
| an hour and a half (a number without units means hours) |
| 1 hour 30 minutes |
| 1 hour 30 minutes |
An entry is from 1 minute to 24 hours. If Flow doesn't understand the input, it hints: "Enter the time, e.g. "2h 30m" or "1.5" — from one minute to 24 hours."
Entry time: if the date is today, the work is assumed to have just finished; if it is another day, it is assumed to have started at 9:00 your local time. An entry belongs to the day the work started — this matters for the period report.
Editing and deleting entries
Your own entries have "Edit entry" and "Delete entry" icons.
Edit opens the "Time entry" window with the "Duration", "Date", "Comment", and "Billable" fields. Click "Save".
Delete removes the entry immediately.
If the entry was changed while you were editing it (for example, in another tab), Flow says: "The entry was changed while you were editing it. The current one is shown — please edit again."
Entries on an archived object cannot be added, changed, or deleted.
The card shows the latest 100 entries. If there are more, the bottom reads "Latest entries are shown; see all in the "Time tracking" report.". Totals are still calculated over all entries.
Time entries do not appear in the object's "History" block — their list with author and time is in the "Time" block.
Estimate: planned vs. actual
If the type has a number field with the key estimate (the estimate in hours), the "Time" block compares actual time with the plan: "6 h of 8 h estimated" and a progress bar. When the time exceeds the estimate, the bar is highlighted and an "Over by …" line appears.
Tasks in the "Tasks" template have the estimate field. You can add it to your own type: a "Number" field with the key estimate — see Flow: object types and fields.
Time of linked objects
A project usually has little time of its own — most of the work is logged on its tasks. That is why the "Time" block shows a "With linked objects: …" line and the breakdown "linked (N): …".
Linked objects are objects that point to this object through a "many to one" relation: a project's tasks, a milestone's tasks, a task's subtasks. Only one level counts: a subtask's time goes into its task but not into the project, unless the subtask itself is linked to the project. Blockers and other "many to many" relations are not included in the total.
The "Spent" column in the table
If no saved view is selected in the table, a type with the estimate field has a "Spent" column: the object's time including linked objects, and the estimate — "3 h 20 min / 8 h". A saved view shows only its own columns. You cannot sort or filter by this column, and it is not included in the table's CSV export.
To have the column in a saved view (or for a type without estimate), add it to the view: in the type settings, on the "Views" tab, add "$time_spent" to the list of columns, for example "columns": ["title", "state", "$time_spent"].
The "Time tracking" report
The "Reports" section → the "Time tracking" tab. The report shows how much time was logged in a period, with grouping and filters.
Setting | Options |
|---|---|
"Period" | "This week" (default), "Last week", "This month", "Last month", "Custom dates" — "From" and "To" fields, both dates inclusive |
"Group by" | "By person", "By object", "By link "…"" — for example, "By link "Project"": tasks' time is rolled up by their project |
"Billing" | "All time", "Billable", "Non-billable" |
"Type" | "All types" or a single object type |
Click "Show". At the top are "Total: …", billable time, and the number of entries; below are group bars from the most time to the least. The object or project name in a group links to it. Entries of objects without a parent through the selected relation are collected in the "Not linked" group.
If the workspace has a task-to-project relation (as in the "Tasks" template), the report opens grouped by project right away. Weeks start on Monday, and day boundaries follow your local time. The period can be no longer than 366 days. Up to 1,000 groups with the most time are shown, and the total covers all of them: "The 1,000 groups with the most time are shown; the total covers all."
CSV export
The CSV button next to "Show" downloads the report's entries with the same period and filters — one row per entry. Columns: date, start time (in your time zone), person, object, type, parent through the selected relation, hours with two decimals, billable mark, comment, and the object and entry IDs. Column headers are service keys (date, person, hours, and so on): the file is meant for spreadsheets and accounting software.
The file holds no more than 50,000 entries. If there are more, Flow warns: "The file has the first 50,000 entries — narrow the period or filter."
Permissions
There is no separate role for time tracking — everything follows the permissions on the object:
Action | Who can do it |
|---|---|
See an object's entries and totals | Anyone who can see the object |
Start a timer, log your own time | Anyone who can edit this object |
Edit or delete your own entry | Anyone who can edit the object |
Edit or delete someone else's entry | Workspace admins and the owner |
Viewers don't log time. Time tracking doesn't make anyone a paid member: anyone who can log time already has permission to change objects.
Totals and the report respect visibility: entries on objects you cannot see are not included in the "With linked objects" total, the report, or the CSV. So different people may see different totals for the same project.
You can log time on behalf of another member only through the API and only with permission to manage the workspace — see Flow API: time tracking.
Limitations
One entry is from 1 minute (for the timer) to 24 hours.
One running timer per person in each workspace.
The card shows the latest 100 entries; CSV holds up to 50,000 entries; the report shows up to 1,000 groups.
Time entries are not copied into new tasks of a recurring series.
There is no "time" dashboard tile yet — use the "Time tracking" tab.
There are no webhooks for time entries.
What's next
Flow: reports, SLA and business calendar — other reports and dashboards.
Flow: the object card — the other blocks of the card.
Flow: members, roles, teams and billing — who can edit objects.
Flow API: time tracking — entries, the timer, and the report through the API.
评论